44 degrees industrial palm oil 2800 yuan / ton Quality Index: FFA (Palmitic): 5.0% max Moisture & Impurity:. Water and impurities 0.15% max Iodine Value (WIJS):. Iodine value of 48 (gl2 / 100) Max Melting Point ° C: Melting point ° C, 44 ° C Peroxide Value: POV 1.0 Colour: Color R30 Sulphur: sulfur content of 3 max mg / kg Pouring Point:. pouring point 23 ° C Sodium: Sodium 1 max mg / kg Iron.: Sodium 2 ppm Sap Value: SAP Value 200 Relative Density (20 ° C): the relative density of 0.895 Refractive Index (50 ° C): the refractive index of 1.455 Water Density: Density of water 472.5 ppm / litre Myristic Acid (c14: 0): myristic acid 7.94 Lauric Acid (c12: 0): Lauric acid 3.25 Palmitic Acid (16: 0): palmitic acid 49 Acid Ester (18: 0): acrylates 7.89 Oleic Acid (c18: 1): Oleic acid 42 Linoleic Acid (c18: 2): linoleic 12.36 Odour: Odourless odor odorless stearic 5500 yuan / ton (candles only) formula: RCOOH (R hydrogenated paraffin base) Quality Standard: Standard People's Republic of China: GB9103-88 hard fatty acid quality standards. Properties: The strains dominated by C16 and C18 fatty acids at room temperature as a white flaky solid, insoluble in water, slightly soluble in carbon stupid and second-rate, soluble in hot ethanol, Wudu tasteless, with organic carboxylic general chemical properties of acids. Key indicators: Acid value mg / g 198-218 saponification value mg / g 200-220 iodine value g / 100g <8. <4.52 Moisture% <0.3% Main Uses: Widely used in rubber curing agent, plastic heat stabilizer, Candles dedicated, lubricants textile softener, make candles, synthetic oil, antistatic agents, food emulsifiers, detergents and cosmetics raw material for a variety of surface active agents and the like. Three industrial rapeseed oil 3000 yuan / ton component specifications :( quality implementation of the German DIN51605 standards) Density (15 ° C) DIN EN ISO 12185 900-930 Kg / m3 ignition DIN EN ISO 2719 min. 220 ° C viscosity (40 ° C) DIN EN ISO 3104 Max 36,0 Mm2 / s heat DIN 51 900-2 Min 36000 kJ / kg cetane IP 498 Min 39 -.... carbon residue DIN EN ISO 10370 Max 0,40% ( m / m) an iodine value of DIN EN 14111 95-125 g / 100g sulfur DIN EN ISO 20884 Max. 10 Mg / kg of total impurities DIN EN 12662 Max. 24 Mg / kg acid value of DIN EN 14104 Max. 2,0 Mg KOH / g oxidative stability (110 ° C) DIN EN 14112 Min. 6,0 H phosphorus content of DIN EN 14107 Max. 12 Mg / kg of the total content of magnesium and calcium (Ca + g) E DIN 14538 Max. 20 Mg / kg ash Content DIN EN ISO 6245 Max. 0,01% (m / m) water content DIN EN ISO 12937 Max. 0,075% (m / m) industrial butter butter GRAY 2800 yuan / ton of refined butter 3000 yuan / ton% Moisture 0.25 Maximum 0.25% impurities largest maximum 0.25 0.25 0.50 maximum unsaponifiable largest maximum 0.50% MIU 1.00 máx. maximum 1.00% free fatty acids 2.5 máx largest maximum 1.0 maximum saponification value (also saponification) 185-202185 -202 maximum iodine value 45-52 45-52 peroxide (maximum) 3.0 meq / kg 2.0 meq / kg no fecal odor odor-free feces smell melting point 41.0 - 42.5 41.0 - 42.5 chroma <5 <1 Цвет Lovibond ( ??.. cells келья 5) Color Lovibond (celda 5) 6.0 красный макс 2.5 красный макс separation of the two cycles Нет No Нет No polythene industrial hardened oil content of 100ppm 100ppm (5000 yuan / ton) with  Uses: This product is mainly Preparation for stearic acid and soap industries.  installation package: product packaging bags lined with plastic or paper bag, net weight 25kg / bag, storage  transport: transportation, storage should pay attention to fire rain, avoid breakage, contamination. Physical indicators: (Q / THG09-1998) Item Index Excellent grade  a two color (Chiari) ≤2 ≤ 2 ≤ 3 Melting point (℃) ≤58 ≤57 ≤56 iodine value (gI / 100g) ≤2.0 ≤ 3.0 ≤5.0 acid value (mgKOH / g) ≤0.5 ≤1 ≤1